Pelco C1095M 2.3 INTER-CHECK WIRING KITS

2PELCO Manual C1095M — 4/94
Listed below are the parameters the must be pro-
grammed into the Inter-Check unit for proper operation.
Table I. Typical Inter-Check Parameters
(for Wayne Dresser Display)
Inter-Check
Channel Parameters Protocol
9600 baud RS232 Standard Printer
8 Bits
Off parity
NRZ
ASCII
Data Non-Invert
2.3 INTER-CHECK WIRING KITS
The wiring configurations shown in Figure 1 and 2 are
a key component to your installation.
•Part #ICI1000WK is used with ICI1000SE
and ICI1000SI installations. This kit includes
the following components:
–2RJ14 phone jacks
–1Straight-through 6 conductor phone
cable
•Part # ICI2000WK is used with ICI2000D
installations. This kit includes the following
components:
–3RJ14 phone jacks
–1Straight-through 6 conductor phone
cable
Figure 1. Wiring Configuration for One (1) Wayne Dresser Register (Display)