Pelco C10DN manual Description, Models, Optional Accessories, Required Tools

Description

The C10DN Series camera is Pelco’s smallest day/night camera. Its day/night technology provides outstanding performance over a wide range of lighting conditions. The camera also uses a removable infrared (IR) cut filter to switch between color and black-white (B-W) modes as environmental lighting conditions change.

On-screen programmable menus can be accessed using the side panel controls. Use these menus to customize camera settings for the specific application.

The C10DN Series camera has a standard CS mount and can be used with fixed, manual, or DC drive auto iris lenses. The auto iris is controlled through a standard 4-pin square connector that is included with all Pelco auto iris lenses.

The C10DN Series camera is quick and easy to install and is ideal for Pelco’s DomePak® and ImagePak® fixed camera dome/enclosure packages.

MODELS

C10DN-6 1/3-inch high resolution day/night, CCD camera, 24 VAC or 12 VDC, NTSC format

C10DN-6X 1/3-inch high resolution day/night, CCD camera, 24 VAC or 12 VDC, PAL format

C10DN-7X 1/3-inch high resolution day/night, CCD camera, 220–240 VAC, PAL format

OPTIONAL ACCESSORIES

C10-UM	C10 series universal wall/ceiling/rail mounting kit.
LDC100	Auto iris drive converter; converts a DC drive auto iris lens to a video drive auto iris lens. Compatible with all lens size formats.
PCMA40	Lens adapter; adapts standard C-mount lenses to CS-mount cameras.

REQUIRED TOOLS

•Small Phillips screwdriver for connector cover

•Small flat tip screwdriver for serial termination

•Allen wrench (1.5 mm) for back focus adjustment

•Neutral density filter (ND3) for auto iris adjustment

C2944M-G (6/09) 7