C1301M (6/05) 37
Quick Programming Guide
(See Page 9)
Software/Language File UploadThe ExSite EHXM system allows access for on-site setup, testing, and uploading of revised operating software and language files.
A Pelco field service tool is required to perform these operations. Field service tools include Pelco’s remote monitor kit (IPS-RMK),
remote data port box (IPS-RDPE-2), and remote monitor cable (IPS-CABLE).
For instructions on how to upload revised operating software and language files refer to the Installation/Operation manual supplied
with the field service tool.
NOTE: Only perform software uploads when necessary. Software uploads do not need to be performed if the system is
operating properly.
UPLOAD ICON
During a software/language file upload, an icon will appear on the monitor to indicate data is being transferred to the system (refer to
the figure below). The default setting for data transmission is 115.2 KB per second. Noisy and long-run connections will slow the
transmission rate.
Upload Icon