Enclosure Reassembly and Recharging

REASSEMBLY

When the enclosure is disassembled, it should be recharged after reassembly and prior to installation. Recharging requires the use of a Pelco EH8000RKIT recharge kit (or equivalent) and applicable O-ring kit, part EH8004ORKIT or EH8006ORKIT.

To prepare the enclosure for recharging:

1.Once the enclosure has been disassembled, remove the O-ring from the rear plate and install a new O-ring in the O-ring groove.

2.After installing the new O-ring, smear a liberal amount of O-ring lubricant (supplied) on the exterior surface of the O-ring and rear plate. Replace the desiccant bag in the enclosure with the new one (supplied).

3.Slide the camera sled back into the body making sure the front lip of the sled is under the retaining bracket of the enclosure. When fully installed, the rear plate will fit firmly into the rear opening of the housing, and the retaining grove will be fully visible.

4.Reinstall the spiral retaining ring in the grove in the rear of the enclosure.

RECHARGING

1.Pressurize the inside of the enclosure using the EH8000RKIT recharge kit. Connect the regulator to the tank by threading the nut into the socket of the tank valve. Tighten with a wrench. This regulator is factory preset for 12 psi (83 kPa).

2.Once the regulator has been secured to the tank, open the regulator valve first and then the tank value.

3.Remove the Schrader valve cap (refer to Figure 1 on page 5). Affix the self-holding tire chuck to the Schrader valve.

4.To reduce the purge time necessary to remove oxygen from the enclosure, position it so that the window is pointing up.

5.Remove the plastic cap on the pressure relief valve on the rear of the enclosure. Use a small screwdriver to hold the valve open. Allow the nitrogen to flow through the enclosure until the humidity indicator registers the lowest humidity level, changing color from pink to blue. (The humidity indicator can be viewed through the front window of the enclosure by looking at the inside top of the enclosure.) Once the humidity indicator registers the lowest level, remove the screwdriver and allow nitrogen to continue to flow into the enclosure until you no longer hear the flow of nitrogen from the tank to the enclosure.

6.Remove the tire chuck from the Schrader valve. Replace the Schrader valve and pressure relief valve caps.

POWER CONNECTION

1.Reconnect the ground wire to the ground stud on the back of the enclosure.

2.Reconnect the electrical connector and turn on power.

8	C1445M-E (2/09)

C1445M-E (2/09) specifications

The Pelco C1445M-E is a high-performance camera designed for a wide range of surveillance applications. As part of Pelco's extensive video surveillance portfolio, this model is renowned for its reliability, advanced features, and ease of integration into existing systems.

One of the standout features of the C1445M-E is its exceptional video quality. It supports high-resolution imaging, allowing for clear and detailed recordings. This ensures that even in challenging lighting conditions, the camera can capture critical details, making it an invaluable tool for security professionals. The camera's wide dynamic range (WDR) technology further enhances image clarity by balancing bright and dark areas within a scene.

The C1445M-E is equipped with advanced low-light performance capabilities. It utilizes technology that enables effective monitoring even in low-light environments, reducing the need for additional lighting equipment. This makes it ideal for outdoor surveillance during dusk and dawn or in poorly lit indoor settings.

In addition to impressive imaging capabilities, the camera features robust connectivity options. It supports both analog and digital outputs, allowing for flexibility in installation. This ensures compatibility with a variety of video management systems and provides users with the versatility needed for different surveillance applications.

Another significant technology embedded in the C1445M-E is its seamless integration with Pelco's advanced video management solutions. This enables users to access live feeds, playback recorded footage, and manage multiple cameras from a single interface, enhancing overall operational efficiency.

The camera's build quality is also noteworthy. Designed for durability, the C1445M-E is housed in a rugged housing suitable for both indoor and outdoor use. Its weather-resistant design ensures reliable performance under various environmental conditions, making it a suitable choice for various applications, from urban monitoring to critical infrastructure protection.

Moreover, the C1445M-E is user-friendly with an intuitive setup process. It simplifies installation and configuration, allowing security personnel to deploy the camera quickly without extensive training or technical expertise.

In summary, the Pelco C1445M-E (2/09) combines high-resolution video, advanced low-light performance, seamless integration with management systems, rugged durability, and user-friendly features. These characteristics make it an outstanding choice for organizations looking to enhance their security posture through reliable and effective surveillance technology.

Pelco C1445M-E (2/09) manual Enclosure Reassembly and Recharging

Models: C1445M-E (2/09)