4C1665M-A (1/06)
Installation
Make sure all parts are present for the unit.
1 Terminal block (with tension clamps)
1 Wall clip

MOUNTING

The TW3004P transceiver is three rack units high and can be mounted into a fiber rack or onto a wall
using a fiber wall mount kit or the supplied wall clip.

USING A RACK

You can mount a TW3004P into either an RK5000PS-3U or an RK5000-3U. For additional information,
refer to the RK5000PS-3U/RK5000-3U Fiber Rack Mount Chassis Installation manual.

USING WALL MOUNT KITS

The optional WM5001-3U wall mount base kit allows attachment of a single TW3004P to a wall.
Upto two WM5001-3UEXP wall mount expansion kits can be used to allow attachment of two
additional transceivers to the wall. For additional information, refer to the Fiber Wall Mount Kits
Installation manual.

USING A WALL CLIP

To attach the TW3004P transceiver to a wall using the supplied wall clip, refer to Figure2 and do the
following:
1. Attach the wall clip to a wall using two screws (not supplied).
2. Slide the transceiver into the clip until the two holes on the bottom of the transceiver align with
the two holes on the lower flange of the clip.
3. Attach the transceiver to the clip using the two Phillips pan head screws provided with the clip.