Pelco C1665M-A (1/06) manual Applications, Mounting the TW3004P Using the Wall Clip

UPPER

FLANGE

VERTICAL

MOUNTING HOLE (2)

TW3004P	HORIZONTAL
	MOUNTING HOLE (2)

LOWER

SCREW, PHILLIPS WALL CLIPFLANGE

PAN HEAD WITH

LOCK WASHER (2)

Figure 2. Mounting the TW3004P Using the Wall Clip

APPLICATIONS

Figures 4 through 7 show how to use the transceivers in various applications. For example, the TW3004P can be connected to a Spectra® or a Camclosure®. The terminal block on the back of the TW3004P has tension clamps instead of screw terminals.

To connect the UTP wires to the terminal block:

1.Use a small screwdriver to open the clamps (+ and -) for each channel.

2.Insert each wire into the appropriate holes. Figure 3 shows the UTP wires for channel 1.

4

3

2

1

Figure 3. Terminal Block UTP Connections

C1665M-A (1/06) 5