6 C1666M-A (4/06)
PARTS OF THE RECEIVER
Figure 1.
TW3001AR Parts
Rubber Feet (4):
For placing unit on a flat surface, such as a desk or shelf.
Status LED:
Lights red when there is no UTP video being received. Lights green when there is
UTP video being received. Flashes amber when Coaxitron pan/tilt/zoom (PTZ) control
commands are being received.
Pelco Badge:
Lights blue to indicate power when using either the 4-pin rack power connector
or the 2-pin power connector.
Rack Power Connector:
4-pin, power from RK5000PS-3U.
Power Connector (3.5 mm):
2-pin; stand-alone power, 12 VDC or 24 VAC.
UTP Connector (2.5 mm):
2-pin connector with removable mating connector.
BNC Connector:
Coaxial output.
DIP Switch:
Override the adaptive technology with the manual selection of cable distance
(1,000-4,000 feet or 305-1,219 meters). Switch 5 is used for selecting high mode or low mode.
+
-
MODEL
SN
FREQ
W
12345
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAYNOTCAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUSING INTERFERENCE THATM
AY CA USEUNDESIRED OPERATION.