Pelco C1666M-A (4/06) 3 , USING A WALL CLIP

8 C1666M-A (4/06)
USING A WALL CLIP
To attach the TW3001AR receiver to a wall using the supplied wall clip, refer to Figure 2 and do the
following:
1. Attach the wall clip to a wall using two screws (not supplied).
2. Slide the receiver into the clip until the two holes on the bottom of the receiver align with the
two holes on the lower flange of the clip.
3. Attach the receiver to the clip using the two Phillips pan head screws provided with the clip.
Figure 2. Mounting the TW3001AR Using the Wall Clip
WALL CLIP
TW3001AR
SCREW, PHILLIPS
PAN HEAD WITH
LOCK WASHER (2)
LOWER
FLANGE
HORIZONTAL
MOUNTING HOLE (2)
VERTICAL
MOUNTING HOLE (2)
UPPER
FLANGE