C1666M-A (4/06) 5
Description
The TW3001AR is a single-channel active receiver that can receive live video over unshielded twisted
pair (UTP) cable.
The adaptive technology in the TW3001AR automatically adjusts the low, medium and high frequency
components of the video signal allowing for the best possible video transmission. The adaptive
technology eliminates the need for manual adjustment by automatically adjusting to provide the most
favorable video transmission depending on cable length needed. The unit has been optimized for use
with Cat5e and Cat6 cable, although Cat3 and Cat5 cable can be used for shorter distances.
The DIP switch on the bottom of the TW3001AR allows you to override the adaptive technology and
manually select the cable distance. Switches 1, 2, 3, and 4 can be set to 4,000 feet (1,219 meters),
3,000 feet (914 meters), 2,000 feet (610 meters), and 1,000 feet (305 meters), respectively. Switch 5
can be set to high mode and low mode.
There are two ways you can power the TW3001AR. You can power it by installing it into an
RK5000PS-3U using the 4-pin connector. For stand-alone power, you can use the 2-pin power
connector and use either a 12 VDC power supply (supplied) or a 24 VAC power supply.
The following features are found on the TW3001AR:
•
Full motion color/black and white video up to 4,000 feet (1,219 meters) with Cat5e or Cat6
•
Supports Coaxitron control (PTZ control signals) up to 750 feet (229 meters)
•
Compatible with all Pelco twisted pair equipped cameras, enclosures, and domes
•
Built-in surge suppression
•
Easy termination with removable UTP connector
•
Supports NTSC, PAL, and SECAM
•
Can be mounted into a Pelco fiber rack, wall mount base kit, or wall clip