Pelco C2232M important safety instructions Important Safety Instructions, Description

C2232M (2/07)

PMCL-VA Monitor

Ceiling Mount Adapter

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Installation should be done only by qualified personnel and conform to all local codes.

6.Only use replacement parts recommended by Pelco.

7.This unit is designed for indoor use only, and it must not be installed where exposed to rain or moisture.

Description

The PMCL-VA monitor mount adapter allows a Pelco PMCL-CM or PMCL-CMP ceiling mount to be used with certain Pelco PMCL500 Series flat panel LCD monitors. The adapter makes the ceiling mount VESA®-compliant. The adapter is required for the following Pelco monitors if they are ceiling mounted:

PMCL537	37-inch flat panel LCD monitor
PMCL542	42-inch flat panel LCD monitor

Installation

The following parts are supplied:

Qty Description

1Adapter plate

4M6 x 12 machine screws

NOTE: It is recommended that at least two people be present when mounting the monitor. One person (or more) should hold the monitor, while a second (or third) person installs the screws to secure the monitor to the adapter plate.

INSTALLING THE CEILING MOUNT

Refer to the appropriate Pelco mount manual for details on installing the PMCL-CM (non-telescoping) ceiling mount, or installing and adjusting the PMCP-CMP (telescoping) ceiling mount. Do the following:

1.Attach the mount to the ceiling.

2.Adjust the length of the telescoping pole (PMCL-CMP only).

3.Adjust the lower section of the mount to the desired direction.

C2232M (2/07) 1