Emerson CATALOG 5150 Http//169.254.1.1/config.htm, Installation Connectivity Module

1-3 Installation Connectivity Module

How to View & Change Configuration Pages from a Connectivity Module

To view and change configuration pages on a client computer, follow these steps:

1.Be sure that your computer is connected to the Internet.

2.Start Microsoft Internet Explorer browser on computer.

3.In the address bar, type in the address of the Connectivity Module, add /config.htm, press Enter :

http://169.254.1.1/config.htm

Type the address of the Connectivity Module and add /config.htm here.

PASSWORD

On the Login screen there is no password until you enter one. If you click Login without entering a password, there is no protection. If you

want protection, click Change Password; the Change Password screen appears. Then enter a password (15 char. max.) in New Password, enter it again in Confirm New Password, and click OK. You can set only one password.

The Connectivity Module sends HTML files to the client computer. Internet Explorer interprets these HTML files, formats them, and displays the pages to the user.

Pages 2-1, 2-2, 3-1, 3-2, 4-1, 5-1 show Device Configurator screens for ATSs and PMs or DPMs (go to the appropriate section for the specific ATS, PM, or DPM).

Tip 

You can add the address to your Favorites for convenient access to multiple Connectivity Modules; follow these steps:

1.Click Favorites, then click Add to Favorites, click New Folder, then type the Folder name (ATS Configuration, for example), and click OK.

2.To rename the address, highlight it, and type the new name, and click OK.

When you are finished viewing pages, close Internet Explorer.

How to View Pages from a Connectivity Module after it is installed

After installation, testing, and configuration is completed, to view pages on a client computer, follow these steps:

1.Be sure that your computer is connected to the Internet.

2.Start Microsoft Internet Explorer browser on the computer.

3.In the address bar, type in the address of the Connectivity Module:

http://169.254.1.1

Type the address of the

Connectivity Module here

The Connectivity Module sends HTML files to the client computer. Internet Explorer interprets these HTML files, formats them, and displays the pages to the user.

Pages 2-3, 3-3, 4-2, 5-2, 5-3 show typical HTML pages (Detail screens) for ATSs and PMs or DPMs (go to the appropriate section for the specific ATS, PM, or DPM).

Tip 

You can add the address to your Favorites for convenient access to multiple Connectivity Modules; follow these steps:

1.Click Favorites, then click Add to Favorites, click New Folder, then type the Folder name (ATSs, for example), and click OK.

2.To rename the address, highlight it, and type the new name, and click OK.

3.When you are finished viewing pages, close Internet Explorer.