A-6 SNMP Internet-standard Protocol

Connectivity Module

Recommended ASCO SNMP MIB file

A file containing 934904-xxx.mib can be downloaded from the location shown below.

http://www.emersonnetworkpower.com/ en-US/Products/PowerSwitchingandControls/MonitoringandControl/Pages/ ASCO5150ConnectivityModuleAcc72E.aspx

The 934904-xxx.mib file is written in the MIB module definition language based on the SMI specifications. This protocol file contains a structure block of information pertaining to ATS status and analog data. When SNMP is enabled, the CM polls for the information and shares it with requesting SNMP manager(s). The SNMP manager must use the file as a reference in sending SNMP requests for ATS information.

Troubleshooting SNMP Configuration

Problem

 

Cause

Solution

SNMP Manager cannot communicate

-

Host running SNMP Manager is

- Check SNMP configuration at

with the Connectivity Module; do not

 

not in the same network or

Connectivity Module

get trap message after alarms occur.

 

Connectivity Module

configuration page.

 

- SNMP is not enabled.

- Hook up a laptop to the same

 

 

 

network and ping the

 

- Incorrect SNMP IP Manager IP

Connectivity Module and SNMP

 

 

addresses

Manager(s).

 

-

Incorrect SNMP community

 

 

 

setting.

 

 

 

 

 

Page 30
Image 30
Emerson CATALOG 5150 installation manual Snmp Internet-standard Protocol Connectivity Module, Problem Cause Solution