C2234M (2/07) 5
5. Connect the video cable/wires to the IS90 back box:
BNC: Connect the BNC connector from the unit to a mating BNC connector.
Twisted Pair (UTP):Blue wire = Video +
Gray wire = Video –
6. Connect the power wires.
7. Use the provided mounting screws and attach the back box to the mount.
8. To position and adjust the camera, and to install the liner and bubble, refer to the Installation
and Operation manual supplied with the IS90 Camclosure integrated camera system.
Voltage Red Wire Black Wire
12 VDC + Ground
24 VAC ~ ~