10 C2404M-A (4/05)

MAKE CAMERA SETTINGS

ZOOM/FOCUS

1. Select a field of view by turning the zoom adjustment ring.
2. Tighten the zoom locking screw.
3. Adjust the focus by moving the focus locking screw clockwise/counterclockwise.
4. Tighten the focus locking screw.

DIGITAL SLOW SHUTTER (DSS)

Digital slow shutter slows the picture frame rate and increases the camera sensitivity under low light
conditions. Depending on the number of fields of integration, the picture will develop a granular
appearance and motion may show some lag, resulting in a stereoscopic effect or streaking on fast
moving objects. These effects increase as the number of fields of integration increase.
Available settings include the following:

ON OFF

30 fields of integration maximum (default setting) – 1/2-second scene update rate.
16 fields of integration maximum – 1/4-second scene update rate.
4 fields of integration maximum – 1/15-second scene update rate.
OFF – Disables the DSS mode.
Digital slow shutter automatically adjusts the number of fields of integration depending on the light
level of the viewed scene, up to the maximum determined by the switch settings.

CAUTION:

Heater elements could be hot! When camera power is on, use caution when
adjusting the camera. This applies to all models.
WHITE INDICATES
SWITCH SETTING LEVEL
PHASE
FOCUS
ZOOM
W
N
T
DSS2
DSS1
AGC
BLC
OFF
ON

C2404M-A.book Page 10 Monday, April 18, 2005 9:11 AM