Pelco C2404M-A (4/05) , INSTALL AND POSITION THE CAMERA

C2404M-A (4/05) 9
INSTALL AND POSITION THE CAMERA
1. Plug the video connector from the camera into the mating connector inside the back box.
2. Position the camera so that the tab on the camera bracket is pointing out of the enclosure,
away from the ceiling or wall. Refer to the following illustrations for proper
camera orientation.
Wall Mounting – The camera bracket
tab points out of the enclosure and the
top of the camera points up towards
the tab.
Ceiling Mounting – The camera bracket tab
points out of the enclosure and the top of the
camera is pointed in the opposite direction.
3. Install the camera bracket. Gently squeeze the bracket, place it against the shoulder inside the
back box, and gently release.
4. Turn on power to the camera and monitor.
CAMERA BRACKET
TAB ALWAYS POINTS
OUT OF THE
ENCLOSURE
CAMERA BRACKET
TAB ALWAYS POINTS
OUT OF THE
ENCLOSURE
TOP OF
CAMERA
C2404M-A.book Page 9 Monday, April 18, 2005 9:11 AM