INSTALLING THE IPS-CABLE: USB CONNECTION
To install the IPS-CABLE to computers with a USB connection, refer to Figure 2 and perform the following steps:
1.Connect the USB-to-serial portable adapter cable (supplied) to the USB port on the computer, and then connect it to the male-to-male adapter (supplied).
2.Connect the 9-pin male connector from the IPS-CABLE (supplied) to the male-to-male adapter, and then connect it to the USB-to-serial portable adapter cable.
3.Connect the IPS-CABLE to the RJ-45 port of the desired dome drive or IPS-RDPE-2.
NOTE: When connected, the IPS-CABLE will interrupt control from the normal control source.
RJ-45 PORT | | RJ-45 PORT | |
OF SPECTRA | | OF PS-RDPE-2 | |
| OR | |
| | | | |
| | | | |
| | | | |
CONNECT
TO
IPS-CABLE
DB-9
MALE
BNC CONNECTOR
TO VIDEO INPUT
ON MONITOR
COMPUTER
MALE-TO-MALE ADAPTER 
CONNECT TO
USB PORT ON
COMPUTER
USB-TO-SERIAL PORTABLE
ADAPTER CABLE
Figure 2. IPS-CABLE Installation with USB Connection
