Pelco C2458M-F manual Installing the IPS-CABLE 9-PIN Serial Connection

INSTALLING THE IPS-CABLE: 9-PIN SERIAL CONNECTION

To install the IPS-CABLE to computers with a 9-pin serial connection, refer to Figure 1 and perform the following steps:

1.Connect a null modem cable (not supplied) to the COM1 or COM2 serial port on the computer.

2.Connect the 9-pin male connector from the IPS-CABLE (supplied) to the null modem cable.

3.Connect the IPS-CABLE to the RJ-45 port of the desired dome drive or IPS-RDPE-2.

NOTE: When connected, the IPS-CABLE will interrupt control from the normal control source.

RJ-45 PORT		RJ-45 PORT
OF SPECTRA		OF PS-RDPE-2
	OR

CONNECT

TO

IPS-CABLE

DB-9

MALE

BNC CONNECTOR

TO VIDEO INPUT

ON MONITOR

COMPUTER

COM 1 COM 2

CONNECT TO

COM 1 OR COM 2

ON COMPUTER

NULL MODEM CABLE (NOT SUPPLIED)

Figure 1. IPS-CABLE Installation with 9-Pin Serial Connection

C2458M-F (4/11) 7