INSTALLING A HARD DISK DRIVE
WARNING:
•Install only hard disk drives received from the Pelco factory.
•Any video on the hard disk drive will be lost when the drive is replaced. If possible, export important video recordings before you replace a hard disk drive. Follow the instructions for exporting video in the DVR5100 Hybrid Video Recorder Operation manual.
1.Locate the hard disk drive cage near the front of the unit.
Figure 3. Locating the Hard Disk Drive Cage
2.To remove a hard disk drive:
a.Using a Phillips screwdriver, remove and set aside the two screws that secure the hard disk drive cage to the bottom of the chassis.
Figure 4. Loosening the Hard Disk Drive Cage
6 |
