2 Pelco Manual C294M (11/98)
3.0 INSTALLATION
To attach the SWM-PA Series pole adapter, perf orm the following steps (see Figure
1 and Table A):
1. Determine the location on the pole where the adapter is to be installed.
2. Position the adapter on the pole so the embossed orientation arrow points
upward. Feed the electrical cables through the cable hole, and attach the
adapter to the pole with two stainless steel straps (supplied).
3. After attaching the pole adapter to a pole, apply Duct Seal to the hole and
around the electrical cable. This will pre v ent moisture from entering the mount
and causing condensation which could damage the equipment. Duct Seal can
be purchased through local electrical supply houses.
Figure 1. SWM-PA Pole Adapter Locator Drawing
Item Qty Description
11Pole adapter, gray or black
21Mounting cleat (not supplied)
32Stainless steel strap
42Screw, 1/4-20, socket head
51Spectra® Compact Wall Mount (not supplied)
61Set screw, 10-24 (not supplied)
Table A. SWM-PA Pole Adapter Key List
2
1
3
4
5
6