Pelco C3453M-B manual Package Contents

PACKAGE CONTENTS

NOTE: A metric Allen wrench (5 mm) is required for installation but is not included. A Phillips screwdriver, flat head screwdriver, or 1/4-inch nut driver is needed for the EH1512-1 and EH1512-3 only. The Allen wrench is needed to open and close the enclosure and to secure the enclosure to all mounts. It is also needed to secure the pan/tilt (swivel head) on the EM1512 mount.

The following items are supplied:

Qty Description

1EH1512 Series enclosure

1Screw, 1/4-20 x 3/8-inch, Phillips

1Washer, 1/4-inch split lock

2Screws, M6 x 1.0 P x 12 mm, hex socket cap

2Washers, 6 mm split lock

1Gland and nut, PG9 cable

1Gland and nut, PG11 cable

1Wire tie, 4-inch (EH1512-1 and EH1512-3 only)

1Installation manual

1EM1512 mount (optional)

1SS1512 sun shroud (optional)

	SHIPPING BOX
				EH1512 ENCLOSURE
				1 EA.
WIRE	HEX SOCKET	6MM	PHILLIPS	1/4-INCH	GLANDS AND NUTS
TIE	CAP SCREW	SPLIT	SCREW	SPLIT	2 EA.
1 EA.	2 EA.	WASHERS	1 EA.	WASHER
		2 EA.		1 EA.
	MOUNT			SUN SHROUD
	1 EA.			1 EA.
	(OPTIONAL)			(OPTIONAL)

Figure 1. Package Contents

C3453M-B (4/09) 5