Pelco C494M-E manual Specifications, Mechanical, Electrical, General

Specifications

Mechanical

Camera Mounting	Adjustable tilt table
Maximum Camera/Lens Size	Accepts camera/lens combinations (including BNC connector) up to
	3.0" H x 3.0" W x 6.0" L (7.62 x 7.62 x 15.24 cm)
Enclosure Mounting	Four 0.390-inch (0.99 cm) diameter holes on protected rear surface
Security	Tamper-resistant screw; N.O./N.C. switch contact on cover
Tamper Switch	Plunger type door switch with “pull to cheat” feature. N.O./N.C. contacts clearly marked on body of
	switch. DM electrical rating: 10 A, 125 VAC.

Electrical

Cable Entry	Access through back and top
Tamper Switch	0.250-inch (0.63 cm) quick connect. N.O./N.C. clearly marked on switch body. 10 A maximum switching
	current, 125 VAC maximum switching voltage

General

Window	0.250-inch (6.35 mm) thick impact and abrasion-resistant, clear Lexan polycarbonate resin thermoplastic
Construction	Formed 14 gauge 0.074-inch (0.19 cm) steel
Finish	Gray polyester powdercoat
Environment	Indoor; 32° to 120°F (0° to 49°C)
Unit Weight	7.77 lb (3.52 kg)

(Design and product specifications are subject to change without notice.)

10.25
(26.04)	10.13
4.50	(25.73)
(11.43)	5.00
	(12.70)
	8.00
	(20.23)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.

10 C494M-E (9/06)