REPLACEMENT TAMPER SWITCH INSTALLATION
The HS2000 enclosure comes with a tamper switch installed. If you need to install a replacement switch, refer to Figure 1 for the correct position of the switch and perform the following steps:
1.Remove the front cover.
2.Install the switch and secure with lock washers and nuts.
TAMPER SWITCH WIRING
The tamper switch comes with normally open and normally closed contacts.
For a normally open circuit, use the “open” and “common” terminals; for a normally closed circuit, use the “closed” and “common” terminals.
BRACKET/SWITCH
MOUNTING PLATE
Figure 1. HS2000 Series Tamper Switch Installation
7 |