Pelco Manual C1941M (7/98) 9
3.2 REAR VIEW
The rear of the unit is illustrated in Figure 4. From left to right are the following:
1 . The f our 16-input blocks of VCR connectors in the f orm of screw-type connec-
tors with associated mating plugs (one shown in Bloc k 1) running from the left
rear to middle right of the unit
2. The VCRC output relay (one per unit)
3. RS-422 input/output communication connectors (RJ-45 type)
4. One DB-9 type connector for factory use only
5. The grouped input power functions, consisting of input power terminals, a
fuse and an ON/OFF switch
Figure 4. Rear View of CM9760-VCRC
NOTE:
VCR block ranges are as-
signed specific VCR type via slide
switches 7 through 10 on DIP
switch 2.
5