PRODUCT WARRANTY AND RETURN INFORMATION
WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
Exceptions to this warranty are as noted below:
•Five years:
–Fiber optic products
–TW3000 Series unshielded twisted pair (UTP) transmission products
–
•Three years:
–
–EH1500 Series enclosures
–Spectra® IV products (including Spectra IV IP)
–Camclosure® Series (IS, ICS, IP) integrated camera systems
–DX Series digital video recorders, DVR5100 Series digital video recorders, Digital Sentry® Series hardware products, DVX Series digital video recorders, and NVR300 Series network video recorders
–Endura® Series distributed
–Genex® Series products (multiplexers, server, and keyboard)
–PMCL200/300/400 Series LCD monitors
•Two years:
–Standard motorized or fixed focal length lenses
–DF5/DF8 Series fixed dome products
–Legacy® Series integrated positioning systems
–Spectra III™, Spectra Mini, Spectra Mini IP, Esprit®, ExSite®, and PS20 scanners, including when used in continuous motion applications.
–Esprit Ti and TI2500 Series thermal imaging products
–Esprit and WW5700 Series window wiper (excluding wiper blades).
–CM6700/CM6800/CM9700 Series matrix
–Digital Light Processing (DLP®) displays (except lamp and color wheel). The lamp and color wheel will be covered for a period of 90 days. The air filter is not covered under warranty.
–
•One year:
–Video cassette recorders (VCRs), except video heads. Video heads will be covered for a period of six months.
•Six months:
–All pan and tilts, scanners, or preset lenses used in continuous motion applications (preset scan, tour, and auto scan modes).
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid to a Pelco designated location. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty.
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.
The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state to state.
If a warranty repair is required, the Dealer must contact Pelco at (800)
(559)
1.Model and serial number
2.Date of shipment, P.O. number, sales order number, or Pelco invoice number
3.Details of the defect or problem
If there is a dispute regarding the warranty of a product that does not fall under the warranty conditions stated above, please include a written explanation with the product when returned.
Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.
RETURNS
To expedite parts returned for repair or credit, please call Pelco at (800)
All merchandise returned for credit may be subject to a 20 percent restocking and refurbishing charge.
Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid.
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
REVISION HISTORY
Manual # | Date | Comments |
C654M | 8/99 | Original version. |
8/02 | Added certifications. Revised Important Safeguards and Warnings. | |
| 9/03 | Revised Important Safeguards and Warnings to advise against interconnecting outputs. Revised table of models to show which ones have Class 2 outputs. |
6/07 | Changed input voltage and environment. Revised Table A. Reformatted manual. | |
7/08 | Revised Table A, and added the the output circuit breaker rating for | |
12/08 | Decreased supply current for |
Pelco, the Pelco logo, Camclosure, Digital Sentry, Endura, Esprit, ExSite, Genex,
DLP is a registered trademark of Texas Instruments Incorporated.
© Copyright 2008, Pelco, Inc. All rights reserved.
