Pelco C655M-A manual Description, Models

Important Safety Instructions

Observe the following WARNINGS before installing and using this product.

1.Installation and servicing should be done by qualified service personnel only and conform to all local codes.

2.Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and must not be installed where exposed to rain and moisture.

3.Only use replacement parts Pelco recommends.

4.After replacing/repairing this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify the exposed parts have not been connected to line circuitry.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

DESCRIPTION

The MCS*E Series consists of multi-output 24 VAC indoor power supplies. These power supplies provide output for 4, 8, or 16 cameras from a single source and come in 2, 5, 10, and 20 amp capacities. The power supplies allow for 120 VAC line input. Higher capacity models can handle pan and tilt and receiver operation, in addition to the camera, for integrated systems such as Spectra® and Esprit®

All MCS*E Series models come with an individual glass fuse for each output channel.

MODELS

Number	Outputs	TotalOutput Current(Amps)	TotalOutput Power(VA)	CurrentMax Per Output(Amps)	PowerMax Per Output(VA)	InputCurrent (Amps)	OutputVoltage (VAC)	Fuses	Surge Protection	On/OffSwitch	PowerLED
Model
MCS4-2E	4	2	48	1	24	0.44	24	X	X	X	X
MCS8-5E	8	5	120	3	72	1.1	24	X	X	X	X
MCS16-10E	16	10	240	3	72	2.2	24	X	X	X	X
MCS16-20E	16	20	480	3	72	4.4	24	X	X	X	X

2 C655M-A (1/07)