Routine Servicing
Never touch the surface of the lens.
Remove dust from the lens using a soft brush or clean compressed air. Avoid touching the lens surface during handling.
To remove fingerprints or oil stains from the lens surface, use lens cleaning paper or a clean cotton cloth with a little cleaning liquid. Then, wipe off the stains using a light circular motion, starting from the center of the lens surface. Wipe the lens body with a silicon cloth. Do not use any organic solvents such as thinner or benzene.
Lens and Connector Wiring Diagrams
Pelco VDIR Type Lenses
TO CAMERA AUTO IRIS SOCKET, DC DRIVE
42
31
3
4
2
1
|
|
| DRIVE ( + ) | RED |
|
|
| ||
|
|
| DRIVE ( – ) | BLACK |
|
|
| ||
| CONTROL ( + ) | G IRIS | ||
| YELLOW | |||
| ||||
| CONTROL ( – ) | GREEN | ||
| ||||
|
|
|
|
|
AUTO IRIS PLUG | ||
| CABLE | |
(REAR OF PLUG, SOLDER LUGS) |
| |
|
|
Specifications
|
|
|
|
Type | Varifocal Infrared | Varifocal Infrared | Varifocal Infrared |
Format Size | |||
Mount Type | CS | CS | CS |
Focal Length | 2.8~11mm | 3~8.5 mm | 7.5~50 mm |
Zoom Ratio | 3.9X | 2.8X | 6.7X |
Relative Aperture (F) | 1.4~2.6 | 1.0~1.6 | 1.3~1.8 |
Operation |
|
|
|
Iris | Auto (Direct Drive) | Auto (Direct Drive) | Auto (Direct Drive) |
Focus | Manual | Manual | Manual |
Zoom | Manual | Manual | Manual |
Angle of View |
|
|
|
Diagonal | 32.7°~123.2° | 41.9°~114.1° | 7.00°~46.2° |
Horizontal | 26.2°~97.4° | 33.6°~90.5° | 5.64°~36.6° |
Vertical | 19.7°~72.4° | 25.2°~67.2° | 4.26°~27.4° |
Minimum Object Distance | 0.3 m | 0.2 m | 0.4 m |
Back Focal Length | 8.66~18.69 mm | 7.94~13.96 mm | 9.61~11.96 mm |
Operating Temperature | 14° to 122°F | 14° to 122°F | |
| |||
Unit Weight | 0.18 lb (0.08 kg) | 0.12 lb (0.05 kg) | 0.15 lb (0.07 kg) |
Shipping Weight | 1 lb (0.45 kg) | 1 lb (0.45 kg) | 1 lb (0.45 kg) |
(Design and product specifications subject to change without notice.)
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
REVISION HISTORY
Manual # | Date | Comments |
|
C761M | 11/06 | Original version. |
|
4/08 | Added |
| |
Pelco, the Pelco logo, and B.O.S.S. are registered trademarks of Pelco, Inc. | ©Copyright 2008, Pelco, Inc. All rights reserved. |
Worldwide Headquarters • 3500 Pelco Way • Clovis, California 93612 USA • www.pelco.com
USA & Canada • Tel:
International • Tel: