Pelco Manual C1471M (10/98) 3

Please thoroughly familiarize yourself with the information

in this manual prior to installation and operation.

1.0 GENERAL

1.1 IMPORTANT SAFEGUARDS AND WARNINGS

Observe the following WARNINGS before installing and using this product.
1. Installation and servicing should only be done by qualified service personnel
and conform to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or
6P enclosure, it is designed for indoor use only and it must not be installed
where exposed to rain and moisture.
3. Only use replacement parts Pelco recommends.
4. After replacing or repairing this unit’s electrical components, measure the re-
sistance between the line and exposed parts to verify the exposed parts have
not been connected to line circuitry.
5. The installation method and materials should be capable of supporting four
times the weight of the enclosure, pan and tilt, camera and lens combination.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous voltage constituting a
risk of electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this
unit.
CAUTION:
RISK OF
ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.