Pelco DVR5100 quick start Log onto the System as Manager, Tap the joystick, keypad, 6262437

Step 1. Log onto the System as Manager

1. At the Login dialog box, select the manager user ID by turning the jog (inner dial) right or left on the front panel control pad.

2. Tap the joystick	to move down to the password field, and then press the blue function button	to display the on-screen
keypad.

Figure 1. Login Dialog Box with On-Screen Keypad and Front Panel Control Pad

3.Enter the password as follows:

a.Tap the joystick right, left, up, and down to select a number, and then press the Enter/Shift button . Each number on the keypad (except for 1 and 0), corresponds to several letters of the alphabet. To enter the password manager, you would select

6262437.

b.Repeat this process until all letters in the password have been selected, and then press the green function button to accept it.

4.Press the green function button again.

2 DVR5100 Series Quick Start Guide 3 DVR Operation