Uninstalling
You can easily uninstall VirusScan Plus using the utility program.
NOTE: The DX8100 must be restarted if the VirusScan Plus software is uninstalled.
To uninstall VirusScan Plus:
1.From the Windows environment, do the following:
a.Go to Start > Settings > Control Panel. The Control Panel dialog box appears.
b.Click “Add or Remove Programs.” The Control Panel dialog box appears.
2.Use the Windows add or remove programs utility to uninstall the software.
3.Restart the DX8100 to complete the process.
Updating the Software
When VirusScan Plus is initially installed, the automatic update feature is enabled by default. If this feature is disabled, you must periodically perform a manual update to VirusScan Plus to protect the DX8100 against newly discovered viruses.
NOTE: To remain effective, your McAfee VirusScan Plus software must be updated on a regular basis. Pelco is not responsible for damage to equipment, software, or video data resulting from computer viruses or worms.
To manually update VirusScan Plus:
1.Exit the DX8100 application and return to the Windows environment.
a.From the DX8100 menu bar, choose File > Exit. The “Shut down” dialog box appears.
b.Click “Exit to Windows.”
c.Click OK. The “Log On to Windows” dialog box appears.
d.Enter the Windows password, and then click OK to log on to the operating system.
2.On the taskbar, click Start > Programs > McAfee > McAfee SecurityCenter. The McAfee SecurityCenter appears.
3.Do one of the following:
• If your DX8100 DVR is attached to a network that is connected to the Internet or a McAfee EPO server, click the Update button.
• If your DVR has access to a McAfee EPO server, consult your network administrator for instructions on configuring and performing McAfee antivirus software updates.
The Update message dialog box appears. The DX8100 does not display icons in the taskbar notification area, therefore you will not be notified when the update completes.
Figure 7. Update Message
6 | C2642M (4/08) |
