Pelco dx8100 manual Press Enter to accept the new password

6. Press Enter to accept the new password.

WARNING: Make sure that you only set the BIOS supervisor password. Do not assign a password to the BIOS user password.

Figure 2. New BIOS Password Dialog Box

7.Re-enter the password to confirm that it is correct.

8.Press Enter to confirm the new password.

Figure 3. Password Confirm Dialog Box

NOTE: Remember to write down this password and keep it in a secure place.

9. Press the F10 function key on your keyboard to save and exit the BIOS setup screen.

C2641M-C (7/09) 7