Pelco EH3014, EH3110 manual

The EH3010, EH3014 and EH3110 are indoor, light-duty camera enclosures. The aluminum en-

closure has a removable rear cap with adjustable glands that make camera and cable installa-

tion simple. A removable front cap provides easy access for manual lens adjustment, without

removing the camera.

EH3010 Mounts horizontally, total camera and lens length must not exceed 8 inches

(20.32 cm)

EH3014 Mounts horizontally, total camera and lens length must not exceed 12 inches

(30.48 cm)

EH3110 Same as EH3010 except mounts vertically

The following items are supplied:

21/4-20 x .50-inch bolts

21/4-inch flat washers

21/4-inch split lock washers

2Camera mounting screw, 1/4-20 x .375-inch, Phillips, pan head (EH3010 and EH3014 only)

1Camera mounting screw, 1/4-20 x .375-inch, Phillips, pan head (EH3110 only)

1. Ensure that the mounting surface is capable of supporting four times the weight of the en-

closure, camera and lens.

2. Remove the two Phillips head screws from the rear cap.

3. Remove the rear cap from the enclosure. Pull the sled assembly out and remove it from the

rail.

4. Place the camera and lens on the sled assembly.

5. Secure the camera and lens to the sled with the 1/4-20 Phillips screw provided. Extend the

lens to its maximum length before installing. This will ensure that the lens has enough

clearance and will not hit the window during focusing.

6. Thread video and power cables through the glands in the rear cap. Connect cables to the

camera. Tighten the glands around the cables. Refer to Tables A and B for wiring information.

7. Place the sled, with the camera, inside the enclosure.

8. Replace the end cap and secure with the Phillips head screws. Make sure the end cap is

firmly seated against the enclosure.

9. To focus camera, remove the front cap and adjust the lens. Refer to the manual supplied

with the lens.

C404M-D (8/00)EH3010/EH3014/EH3110Indoor Enclosures

3500 Pelco Way

Clovis, CA 93612-5699

USA

In North America & Canada:

Tel (800) 289-9100

FAX (800) 289-9150

International Customers:

Tel +1(559) 292-1981

FAX +1(559) 348-1120