Specifications
ELECTRICAL
Input Voltage | 120 VAC (230 VAC optional) for heaters |
Power Requirements | 80 W |
Connector | |
Maximum Cable Distances |
|
120 VAC |
|
16 AWG (1.5 mm2) | 2,238 ft (682 m) |
18 AWG (1.0 mm2) | 1,410 ft (430 m) |
20 AWG (0.5 mm2) | 1,040 ft (316 m) |
230 VAC |
|
16 AWG (1.5 mm2) | 8,224 ft (2,507 m) |
18 AWG (1.0 mm2) | 5,182 ft (1,579 m) |
20 AWG (0.5 mm2) | 3,257 ft (993 m) |
Heater | 2 at 40 W, 120 VAC |
NOTE: Heaters are thermostatically controlled to turn on at 40°F (4°C) and turn off at 60°F (16°C) | |
GENERAL
Construction | Aluminum 6061 T6 |
Finish |
|
Outside | Gray polyester powder coat |
Inside | Black anodized |
Front Window | |
Camera Mounting | Multiple mounting holes on camera sled allow for linear adjustment |
Maximum Camera/Lens Size | 5.0" D x 18.0" L (13 x 46 cm) or |
| 18.0" L x 4.0" W x 4.0" H (46 x 10 x 10 cm) |
Enclosure Mounting | RediLINK |
Purge Fitting | Standard Schrader valve to allow enclosure to be filled with dry nitrogen |
Purge Relief Fitting | Prevents overpressurization of enclosure |
Weight | 17.2 lb (7.8 kg) |
Ratings | Meets NEMA Type 6 and IP 67 standards |
9 |
