C2428M-B (1/06) 9

Specifications

ENCLOSURE

Camera Mounting Multiple holes on adjustable camera sled; camera
sled mounts in threaded strip for easier removal and
can be inverted for additional camera elevation
Camera and Lens Size Accommodates camera and lens combinations
(including BNC connector) 2.87” W x 3.00” H x 9.00” L
(7.28 x 7.62 x 22.86 cm)
Viewing Window Lexan

®

, 0.187-inch (4.75 mm) thick, optically clear,
impact-resistant, MR5 coated (U.L. 94HB rated)
Viewing Area 2.25” H x 2.63” W (5.71 x 6.68 cm)
Cable Entry Two PG13.5 compression glands on the bottom of the
enclosure; maximum cable diameter 0.47-inch
(1.19 cm)
Cable Entry Holes 0.875-inch diameter; will accept 0.50-inch (1.27 cm)
conduit fitting when compression gland is removed
Latch Link-lock, stainless steel, can be secured with
padlock (not supplied)

GENERAL

Construction Extruded and die-cast aluminum body
Dimensions Refer to Figure 2
Ratings NEMA 4, IP 66
Environment 10° to 120°F (-23° to 49°C)
Weight 4 lb (1.75 kg)

MOUNT

Pan Adjustment 360°
Tilt Adjustment ± 75°
Construction Mounting Arm Die cast aluminum
Tilt Table and Support Bracket Aluminum
Finish Gray polyester powder coat
Maximum Load 20 lb (9 kg)
Dimensions See Figure 3
Unit Weight 2 lb (0.91 kg)
Environment Indoor/outdoor
(Design and product specifications subject to change without notice.)