| VIDEO CONNECTOR |
|
| POWER TERMINAL |
|
MALE CONNECTOR |
| HEATER |
FROM NEW BOARD |
| |
|
| CONNECTOR |
FEMALE VIDEO |
| HEATER |
CONNECTOR |
| CONNECTOR |
(OLD BOARD) |
|
|
| 24 VAC JUMPER | VIDEO CONNECTOR |
|
| |
| 24 VDC JUMPER |
|
Connect the camera video and heater connectors to the board. Plug the video connector from the camera into the mating connector on the board. If the heater is installed, plug the heater connector from the camera into the mating connector.
Install the camera. Gently squeeze the camera bracket, place it against the shoulder inside the base, and then gently release.
6 | C2405M (8/02) |
