IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should only be done by qualified service personnel and conform
to all local codes.
2. Only use replacement parts recommended by Pelco.
3. The installation method and materials should be capable of supporting four times the maxi-
mum specified load.
4. To prevent damage from water leakage when installing a mount outdoors on a roof or wall,
apply sealant around the bolt holes between the mount and mounting surface.
DESCRIPTION
The ICS200-CM is a corner mount specifically designed for the ICS200 Camclosure™ Integrated
Camera System. The mount is the perfect solution for installing the ICS200 in a tight area such
as a stairwell, hallway, or elevator.
INSTALLATION
To install the ICS200-CM do the following (refer to Figure 1):
1. Use the ICS200-CM as a template and mark the four fastener positions on the mounting
surface. Prepare the surface.
NOTE:
When installing flush against a ceiling, measure down 6.50-inches from the ceil-
ing (refer to Figure 1). A .50-inch clearance, between the top of the corner mount and
the ceiling, is required to complete the installation of the ICS200 to the ICS200-CM.
2. Route the wiring/cabling through the mount. Attach the ICS200-CM to the surface with the
appropriate hardware (not supplied). If you install the corner mount outdoors, apply a seal-
ant between the mount and the mounting surface.
3. You must reorient the camera module inside the ICS200 when using the ICS200-CM corner
mount. Refer to the ICS200 Installation Manual for instructions on how to install and adjust
the camera module.
4. Use the three screws provided with the
corner mount and attach the base of the
ICS200 to the ICS200-CM. To complete
the installation, refer to the Installation
and Operation manual supplied with the
ICS200.
C298M-B (5/01)
ICS200-CM
Corner Mount
®
3500 Pelco Way
Clovis, CA 93612-5699
USA
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
International Customers:
Tel +1(559) 292-1981
FAX +1(559) 348-1120
www.pelco.com
Figure 1.
ICS200-CM Installation
ICS200-CM
BASE OF ICS200
00056
.5"
6.5"
CLEARANCE