Instructions for the installer

2. INSTALLING THE APPLIANCE

The appliance must be installed by a qualified engineer in compliance with the relevant regulations. Depending on the type of installation, it is in class 1 (Fig. A) or class 2 - sub-class 1 (Fig.B-C).

It may be installed against walls one of which is higher than the worktop surface, at least 50 mm from the side of the appliance, as shown in the installation class drawings A and B. Wall units or extractor hoods installed above the appliance's work-top must be at least 750 mm above it.

A

Built-in Appliance

B

Free-Standing Installation

C

Appliances with gas cylinder compartment and electric oven may only be installed in free- standing mode (see fig. B).

2.1 Wall fixing (on some models only)

Stretch out the chain attached to the cooker horizontally so that the other end touches the

wall.

Mark the wall in the position where the hole is to

be drilled.

Drill the hole, insert a wall plug and attach the chain.

Move the cooker up against the wall.

6

Page 4
Image 4
Smeg CB66CES1 manual Installing the Appliance, Wall fixing on some models only