Smeg CB66CES Description of Front Panel Controls, Cooking HOB Control Knob, Standard heating

Instructions for the User

3. DESCRIPTION OF FRONT PANEL CONTROLS

All the cooker's control and monitoring devices are placed together on the front panel. The table below provides the key to the symbols used.

FRONT RIGHT-HAND	ELECTRIC OVEN THERMOSTAT
COOKING ZONE
REAR RIGHT-HAND COOKING	OVEN FUNCTIONS
ZONE

REAR LEFT-HAND COOKING

ZONE

FRONT LEFT-HAND COOKING

ZONE

If the cooker is equipped with an electronic programmer, before using the oven check that the symbol appears on the display; see point “8.1 Setting the time".

COOKING HOB CONTROL KNOB

Standard heating

The circle next to each knob indicates the hob cooking position that will be activated. To adjust the heat, press and turn the knob to the desired position. Adjustment is continuous so that the appliance also operates at any intermediate value. To turn off, return the knob to 0.

Double heating

The circle next to each knob indicates the cooking zone it controls. To heat the inner cooking zone, press and turn the knob to the desired position.

To heat both the inner and outer cooking zones, turn the knob to ; and then release. The knob will thus return to 12. To adjust heating intensity, rotate the knob anticlockwise to the desired position. To return to heating of the inner

cooking zone only, set the knob back to and then turn to the desired position. To switch off, return knob to .

8