Dell PP09L owner manual Error Messages

3If you run a test from the Custom Test or Symptom Tree option, click the applicable tab described in the following table for more information.

Tab	Function
Results	Displays the results of the test and any error conditions
	encountered.
Errors	Displays error conditions encountered, error codes, and
	the problem description.
Help	Describes the test and may indicate requirements for
	running the test.
Configuration	Displays your hardware configuration for the selected
	device.
	The Dell Diagnostics obtains configuration information
	for all devices from the system setup program, memory,
	and various internal tests, and it displays the information
	in the device list in the left pane of the screen. The
	device list may not display the names of all the
	components installed on your computer or all devices
	attached to your computer.
Parameters	Allows you to customize the test by changing the test
	settings.

4When the tests are complete, close the test screen to return to the Main Menu screen. To exit the Dell Diagnostics and restart the computer, close the Main Menu screen.

Error Messages

If the message is not listed, see the documentation for the operating system or the program that was running at the time the message appeared.

T H E FILE BEING COPIED IS TOO LARGE FOR THE DESTINATION DRIVE — The file that you are trying to copy is too large to fit on the disk, or the disk is too full. Try copying the file to a different disk or use a larger capacity disk.

A FILENAME CANNOT CONTAIN ANY OF THE FOLLOWING CHARACTERS : \ / : * ?

“< > — Do not use these characters in filenames.

I NSERT BOOTABLE MEDIA — The operating system is trying to boot to a nonbootable floppy disk or CD. Insert a bootable floppy disk or CD.

Solving Problems

77