Dell PP09L owner manual Installing the System Board

Models: PP09L

1 186
Download 186 pages 1.19 Kb
Page 137
Image 137
Installing the System Board

8Turn the system top-side up again, and remove the four M2.5 x 6-mm screws from the system-board top assembly.

9With the front of the computer facing you, lift the system-board top assembly from the right side, swinging it up, then lift the left side and draw the system-board top assembly out of the computer.

system-board top assembly

Installing the System Board

1Perform all of the steps in "Removing the System Board" on page 135 in reverse order.

NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

2Turn on the computer.

NOTE: After replacing the system board, you must enter the computer Service Tag sequence into the BIOS of the replacement system board as part of the BIOS update procedure.

3Insert the flash BIOS update program floppy disk or CD that accompanied the replacement system board into the appropriate drive. Follow the instructions that appear on the screen.

Adding and Replacing Parts

137

Page 137
Image 137
Dell PP09L owner manual Installing the System Board