
w w w . d e l l . c o m s u p p o r t . d e l l . c o m
PC Card With Bluetooth® Wireless Technology
CAUTION: Before you begin this procedure, read the safety instructions at the front of this document (see page 11).
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
If you ordered a PC Card with Bluetooth wireless technology with your computer, it is already installed.
1Remove the battery (see page 52).
2Open the card door.
3Using a plastic scribe or screwdriver, gently pry the module from the plastic guide bracket and the compartment so that you can disconnect the card from its cable and remove it from the computer.
card | card connector |
card door