Pelco IS110 manual Technical Specifications, General, Electrical, Mechanical, Video, Environmental

TECHNICAL SPECIFICATIONS

GENERAL

Construction	Aluminum with steel camera mounting
	bracket and polycarbonate dome
Finish	Light gray polyester powder coat
Light Attenuation
Smoked	1.5 F-stops light loss
Clear	Zero light loss
Unit Weight	2.20 lb (1.00 kg)
Shipping Weight	4.0 lb (1.81 kg)

ELECTRICAL

Input Voltage*	12 VDC or 24 VAC (±10%), autosensing
Synchronization	Internal or AC line lock
Power Consumption
Camera	<3 W (DW/CW models)
	< 4 W (DN/CH models)
Heaters	10 W when active; thermostatically controlled

MECHANICAL

Cable Entry	One 0.75-inch (1.91 cm) NPT threaded
	opening on side; two 0.75-inch (1.91 cm)
	openings on base
Pan/Tilt Adjustment	Manual
Pan	360°
Tilt	80° (20° to 100° range)
Rotation	360°

VIDEO

Signal System	NTSC or PAL
Video Output
Composite	1 Vp-p, 75 ohms
UTP	1 Vp-p, 100 ohms
Video Connectors	1 composite BNC and 1 UTP
Service Connector	3-conductor, 2.5 mm connector for video
	output to optional ICS-SC cable

ENVIRONMENTAL

Environment	Low temperature, indoor/outdoor
Operating Temperature	-50° to 122°F (-46° to 50°C);
	de-ices to 25°F (-4°C)
Thermostat Operation	Heater is thermostatically controlled to
	activate ON at 50°F (10°C) and OFF at
	80°F (27°C)

CERTIFICATIONS/RATINGS/PATENTS

•CE, Class B

•UL Listed

•UL Listed to Canadian safety standards

•FCC, Class B

•Meets NEMA Type 4X and IP66 standards

•U.S. Patents D476,025; 6,715,939 B2; 6,805,498 B2

5.50

(13.97)

1.76

2.36(4.47)

(6.00)

4.01

(10.19)

3.79

(9.63)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

*24 VAC power is recommended when installing any Camclosure Integrated Camera System under fluorescent lighting conditions.