Pelco IS150 manual Specifications, General, Electrical, Video, Environmental, Camera/Lens

Specifications

GENERAL
Pan/Tilt Adjustment	Manual
Pan	360°
Tilt	80° (20° to 100° range)
Rotation	360°
Construction	Aluminum with steel camera mounting bracket and polycarbonate dome
Finish	White polyester powder coat trim ring with gray polyester powder coat
	back box
Light Attenuation
Smoked	1.5 F-stops light loss
Clear	Zero light loss
Unit Weight	1.70 lb (0.77 kg)
ELECTRICAL
Input Voltage*	12 VDC or 24 VAC (±10%), autosensing
Synchronization	Internal or AC line lock
Power Consumption
Camera	< 3 W (DW/CW models)
	< 4 W (DN/CH models)
Heaters	10 W when active, thermostatically controlled

*24 VAC power is recommended when installing any Camclosure Integrated Camera System under fluorescent lighting conditions.

VIDEO
Signal System	NTSC or PAL
Video Output
Composite	1 Vp-p (75 ohms)
UTP	1 Vp-p (100 ohms)
Video Connectors	1 composite BNC and 1 UTP
Service Connector	3-conductor, 2.5 mm connector for video output to optional IS-SC cable
ENVIRONMENTAL
Environment	Low temperature, indoor/outdoor
Operating Temperature	-50° to 122°F (-46° to 50°C); de-ices to 25°F (-4°C)
Thermostat Operation	Heater is thermostatically controlled to activate ON at 50°F (10°C) and
	OFF at 80°F (27°C)

CAMERA/LENS

If you need technical specifications for the camera itself, refer to the IS150 specification online at www.pelco.com.

(Design and product specifications subject to change without notice.)

28 C3427M-C (10/07)