Pelco IV SE SERIES manual Specifications, General, ELECTRICAL Dome Drive Only

Specifications

GENERAL

Construction
Back Box	Aluminum
Dome Drive	Aluminum, thermoplastic
Lower Dome	Acrylic
Cable Entry (Back Box)	Through 1.5-inch NPT pendant
	mount
Pan Movement	360° continuous pan rotation
Vertical Tilt	Unobstructed +2° to -92°
Manual Pan/Tilt Speeds*
Pan	0.1°- 80°/sec manual operation,
	150°/sec turbo
Tilt	0.1°- 40°/sec manual operation
Preset Speeds
Pan	400°/sec
Tilt	200°/sec
Environment	Indoor/outdoor
Operating Temperature
Standard Pendant	(Assumes no wind chill factor)
Maximum	140°F (60°C) absolute maximum
	in shade; 122°F (50°C) sustained
	maximum in shade; 113°F (45°C)
	absolute maximum in direct sun-
	light; 95°F (35°C) sustained maxi-
	mum in direct sunlight
Minimum	25°F (-4°C) sustained minimum
Environmental Pendant	(Assumes no wind chill factor)
Maximum	140°F (60°C) absolute maximum ;
	122°F (50°C) sustained maximum
Minimum	-60°F (-51.1°C) absolute mini-
	mum; prevents icing at sustained
	minimum of -50°F (-45°C);
	de-ices 0.1 inch (2.5 mm) within 3
	hours after power-up

*For variable-speed operation an appropriate controller is required. With fixed-speed controllers, pan/tilt speed is 20°/ sec. The CM6700/CM6800 controller with the KBD200A keyboard has programmable fixed speeds.

Weight (approximate)
Back Box
Standard Pendant	2.4 lb (1.09 kg)
Environmental Pendant	3.5 lb (1.59 kg)
Dome Drive	3.3 lb (1.48 kg)
Lower Dome	0.2 lb (0.09 kg)

ELECTRICAL (Dome Drive Only)

Input Voltage	18-32 VAC; 24 VAC nominal
	22-27 VDC; 24 VDC nominal
Input Power
24 VAC	23 VA nominal (indoor, without heater)
	73 VA nominal (outdoor, with heater)
24 VDC	0.7 A nominal (indoor, without heater)
	3 A nominal (outdoor, with heater)
Fuse	1.25 A
Auxiliary Outputs	2 (Spectra IV SE only)
Alarm Inputs	7 (Spectra IV SE only)
Relay Contacts	AUX 1	AUX 2 Output
Type	Form C	Open collector
		transistor output
Voltage	Low voltage (<40 V)	32 VDC maximum
Current	2 A maximum	150 mA maximum

10.6

(26.9)

5.9 (15.0)

8.6 (21.8)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.

The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.

This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.

14 C3418M (8/06)