1
17
16
15
14
2 | 3 | 4 |
|
|
|
| 5 | 6 |
|
| SHIFT |
|
|
|
|
| |
|
|
|
| F1 | F2 | F3 | F4 | F5 |
|
|
|
| SEQUENCE |
|
|
|
|
| MON | ACK | PREV | NEXT | HOLD | PATTERN PRESET MACRO | PGM | |
| 1 | 2 | 3 | NEAR |
| FAR |
|
|
| 4 | 5 | 6 | OPEN |
| CLOSE |
|
|
|
|
|
|
|
|
| ||
| 7 | 8 | 9 |
|
|
|
|
|
| CLEAR | 0 | CAM |
|
|
|
|
|
KBD300
MADE IN USA.
13 | 11 |
*The turbo pan
7 feature may be disabled. Place switch 4 on the rear panel DIP switch block in the off position.
See Figure 4.
8
9
10
12*
1.DIGIT DISPLAY LED Displays monitor number in Run mode and P in program mode.
2.SHIFT KEY Press to activate Multiplexer Mode.
3.SHIFT KEY LED Illuminates when Multiplexer Mode is active.
4.SEQUENCE KEYS
When Sequence Status Indicator displays O on monitor (sequence not running and not on hold)
PREVIOUS (PREV) Press to step backward through all available system cameras. Hold for two seconds to start a sequence in reverse.
NEXT Press to step forward through all available system cameras. Hold for two seconds to start a sequence. HOLD No function.
When Sequence Status Indicator displays F or B (se- quence running forward or backward)
PREVIOUS (PREV) Press to step backward through a sequence and/or reverse a forward sequence.
NEXT Press to step forward through a sequence and/or reverse a backward sequence.
HOLD Press to place a sequence on hold.
When Sequence Status Indicator displays H (sequence on hold)
PREVIOUS (PREV) Press to step backward through the camera sequence, including presets. Hold for two sec- onds to start a sequence in reverse.
NEXT Press to step forward through the camera se- quence. Hold for two seconds to start a sequence. HOLD No function.
5.FUNCTION KEYS, Normal Operation F1 Press to activate the NO/NC relay.
F2 Press to activate the F2 open collector output.
F3 Press to activate the F3 open collector output.
F4 Press to activate a receiver/driver auxiliary for selected camera. Press and hold for momentary aux.
F5 Press to deactivate a receiver/driver auxiliary for se- lected camera.
6.FUNCTION KEYS, Multiplexer Mode (Shift Key LED Illuminated)
F1 Press to activate digital zoom.
F2 Press to activate Picture in Picture.
F3 Press to activate Quad display.
F4 Press to activate
F5 Press to activate
7.PROGRAM KEY (PGM) Press to enter the program mode.
8.MACRO KEY Start a salvo sequence (macro 1 or 2) by first entering the macro number then pressing this key.
9.PRESET KEY Send a camera to a preset by first enter- ing the preset number then pressing this key. Program a preset by first entering the preset number then holding the key for two seconds
10.PATTERN KEY Press to begin a pattern. Hold for two seconds to program a pattern.
11.LENS CONTROL KEYS Control camera lens functions; focus and iris.
12.PTZ FUNCTION JOYSTICK Variable speed, vector- solving,
13.CLEAR KEY Clear a numeric entry.
14.CAMERA KEY (CAM) Select a camera by first enter- ing the camera number then pressing this key.
15.NUMBER PAD Enter numbers.
16.ALARM ACKNOWLEDGE (ACK) Press to acknowl- edge an alarm.
17.MONITOR KEY (MON) Select a monitor by first enter- ing the monitor number then pressing this key.
Figure 1. KBD300 Keyboard Definitions
Pelco Manual C527M (11/97) | 3 |
