CCC2400/MCC2400 SERIES COMPACT CAMERAS INSTALLATION/OPERATION

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of the product, the following WARNINGS should be observed.

1.Installation and servicing should be done only by qualified service personnel and conform to all local codes.

2.Power camera only from a UL Listed, Class 2 isolated power supply.

3.Do not touch the image surface of the sensor. If the sensor is accidentally touched, clean it only with isopropanol.

4.Do not expose the camera sensor to very bright light over a long period of time as this may damage the CCD. The camera and lens setup must be correct to avoid continual overexposure to bright light. A lens with an automatic iris is recommended under these conditions.

5.Before installing the lens, make sure that its back will not touch the CCD sensor or associated components when it is screwed into the camera.

6.For outdoor use, an appropriate protective housing conforming to IP65 or UL50 or better must be used.

AUTO IRIS LENS CONNECTOR

The maximum load must not exceed 50 mA

REGULATORY NOTICES

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

MODELS

CCC2400S-4 Standard resolution (330 TV lines) color camera, 1.0 lux at f1.2, NTSC

CCC2400S-4X Standard resolution (330 TV lines) color camera, 1.0 lux at f1.2, PAL

CCC2400H-4 High resolution (470 TV lines) color camera, 1.2 lux at f1.2, NTSC

CCC2400H-4X High resolution (470 TV lines) color camera, 1.2 lux at f1.2, PAL

MCC2400S-4 Standard resolution (380 TV lines) monochrome camera, 0.1 lux at f1.2, EIA

MCC2400S-4X Standard resolution (380 TV lines) monochrome camera, 0.1 lux at f1.2, CCIR

CAMERA LAYOUT

Refer to Figure 1.

Figure 1. Location of Parts

Auto Iris Lens Connector (DC drive only)

Camera Mounts

Lens Level Adjustment

Lens Mount/Back Focus Adjustment Ring

Electronic Shutter Control (ESC) Switch

Back Focus Locking Screw (on the side of the camera)

Power Input Terminals

Backlight Compensation Switch

Video Output Connector

DESCRIPTION

The CCC2400 Series and the MCC2400 Series comprise color or monochrome cameras with 1/3-inch CCD imagers and a direct drive lens connector. All cameras accept CS lenses; C lenses can be used but require Pelco’s PCMA40 C-mount adapter. Color cameras have digital signal processing (DSP) and auto white balance.

INSTALLATION

1.The camera accepts a CS-mount lens with a fixed iris, manual iris, or direct drive auto iris. A C-mount lens can be used but requires Pelco’s PCMA40 C-mount adapter. Screw the lens into the camera. For a direct drive auto iris lens, connect the four-pin plug to the auto iris lens connector on the camera.

Page 1 Page 2
Page 1
Image 1
Pelco MCC2400 manual Important Safeguards and Warnings, Regulatory Notices, Models, Camera Layout, Description
Page 1 Page 2

MCC2400 specifications

The Pelco MCC2400 is a versatile and advanced camera control system designed for professional video surveillance applications. As part of Pelco's renowned product line, the MCC2400 excels in managing multiple cameras, making it an ideal choice for security monitoring in various environments, including transportation hubs, large retail spaces, and critical infrastructure.

One of the standout features of the MCC2400 is its user-friendly interface, which simplifies camera operation and programming. The system offers a programmable joystick for intuitive manual control, allowing operators to pan, tilt, and zoom cameras seamlessly. The joystick’s responsive design provides precise control, essential for tracking fast-moving subjects or focusing on specific areas of interest.

The MCC2400 also supports high-definition video streaming and advanced video analytics, enhancing its surveillance capabilities. The system is compatible with various camera models, including PTZ (pan-tilt-zoom) cameras, ensuring scalability and adaptability to different surveillance needs. Video feeds can be transmitted in real-time, allowing operators to monitor live footage and respond to incidents as they occur.

In terms of connectivity, the MCC2400 is equipped with both RS-422 and RS-485 communication protocols. This versatility enables integration with a wide range of camera systems and other surveillance equipment, facilitating a comprehensive security solution. Additionally, the system supports multi-site operation, enabling security personnel to manage cameras across different locations from a central control point.

Robustness and reliability are vital characteristics of the MCC2400. The system is designed to operate in challenging environments, with features that enhance its durability and performance. It is also equipped with a fail-safe mechanism, ensuring continuous operation even during power interruptions or system failures.

Furthermore, the MCC2400 is built with advanced cybersecurity measures to protect against unauthorized access and data breaches. This focus on security is essential in today's interconnected world, where safeguarding sensitive information is paramount.

In conclusion, the Pelco MCC2400 stands out as a comprehensive camera control solution that combines ease of use with advanced technology. Its high-definition support, robust connectivity options, and strong cybersecurity features make it an essential tool for any professional video surveillance operation.
Top Page Image Contents