2.Mount the camera. There are two 1/4-20 UNC mounting points, one on the top of the case and one on the bottom of the case.

3.Connect power to the terminals on the back of the camera. The terminals will accept a Class 2 isolated power supply of 12 VDC +15%, -10% (10.8 to 13.8 VDC) with a ripple of less than 200 mV.

4.Connect a video cable to the video output connector on the back of the camera.

5.Set the electronic shutter control (ESC) switch on the camera. The electronic shutter control compensates for excessive light levels by automatically adjusting the shutter speed.

If you have a manual iris lens, set the ESC switch OFF and adjust the lens for the correct exposure. Then set the switch ON.

Set the switch ON when using a fixed iris lens.

Set the switch OFF when using a direct drive auto iris lens.

6.Set the backlight compensation (BLC) switch on the camera. Backlighting compensates for backlit scenes by enhancing objects in the center of the scene that would previously have been in silhouette. BLC will function with a manual iris lens only when the ESC switch is on. BLC will function with a direct drive auto iris lens with the ESC switch on or off.

7.If the camera has an auto iris lens, adjust the lens level adjustment to obtain a 1 Vp-p setting. The ESC switch must be OFF.

MCC2400S-4 and MCC2400S-4X Models Only—If the ESC switch is ON, the lens level adjustment potentiometer controls the exposure level when using a manual iris lens.

8.Adjust the focus. Use a suitable tool to loosen the back focus locking screw, and then rotate the focus adjustment ring clockwise or counterclockwise. Tighten the locking screw when the adjustment is satisfactory.

SPECIFICATIONS

CCD Sensor:

1/3-inch

Electronic Shutter Control:

On/off

Backlight Compensation:

On/off

White Balance:

Automatic

Signal Processing:

Digital

Power Requirements:

12 VDC +15%, -10%; ripple less than

 

200 mV

Power Connector:

Screw terminals

Video Connector:

BNC

Lens Jack:

4-pin connector (miniature square)

Lens Mount:

C/CS-mount

Camera Mount:

Use 1/4-20 screw, top or bottom of

 

camera housing

Operating Temperature:

14° to 122°F (-10° to 50°C)

Dimensions (without lens):

2.9 (D) x 2.3 (W) x 2.3 (H) inches

 

(7.4 x 5.8 x 5.8 cm)

Weight (without lens):

0.32 lb (0.147 kg)

(Design and product specifications subject to change without notice.)

WARRANTYAND RETURN INFORMATION

Pelco will repair or replace, without charge, any merchandise proved

The above warranty provides the Dealer with specific legal rights. The

defective in material or workmanship for a period of three years after

Dealer may also have additional rights, which are subject to variation

the date of shipment.

from state to state.

Pelco will warrant all replacement parts and repairs for 90 days from

If a warranty repair is required, the Dealer must contact Pelco at (800)

the date of Pelco shipment. All goods requiring warranty repair shall be

289-9100 or (559) 292-1981 to obtain a Repair Authorization number

sent freight prepaid to Pelco, Clovis, California. Repairs made necessary

(RA), and provide the following information:

by reason of misuse, alteration, normal wear, or accident are not covered

 

under this warranty.

1. Model and serial number

 

Pelco assumes no risk and shall be subject to no liability for damages or

2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice

number

loss resulting from the specific use or application made of the Products.

3. Details of the defect or problem

Pelco’s liability for any claim, whether based on breach of contract,

 

negligence, infringement of any rights of any party or product liability,

 

relating to the Products shall not exceed the price paid by the Dealer to

If there is a dispute regarding the warranty of a product which does not

Pelco for such Products. In no event will Pelco be liable for any special,

fall under the warranty conditions stated above, please include a written

incidental or consequential damages (including loss of use, loss of

explanation with the product when returned.

profit and claims of third parties) however caused, whether by the

 

negligence of Pelco or otherwise.

Method of return shipment shall be the same or equal to the method by

 

 

which the item was received by Pelco.

www.pelco.com

ISO9001

Orangeburg, New York Las Vegas, Nevada Eindhoven, The Netherlands Workingham, United Kingdom Montreal, Canada Singapore

World Headquarters

USA & Canada

International

3500 Pelco Way

Tel: 800/289-9100

Tel: 1-559/292-1981

Clovis, California 93612 USA

Fax: 800/289-9150

Fax: 1-559/348-1120

Manual #

Date

Comments

C1989M

8/03

Original version.

C1989M-A

7/04

Changed warranty period from two years to three years.

Page 2
Image 2
Pelco MCC2400 manual Specifications, Warrantyand Return Information

MCC2400 specifications

The Pelco MCC2400 is a versatile and advanced camera control system designed for professional video surveillance applications. As part of Pelco's renowned product line, the MCC2400 excels in managing multiple cameras, making it an ideal choice for security monitoring in various environments, including transportation hubs, large retail spaces, and critical infrastructure.

One of the standout features of the MCC2400 is its user-friendly interface, which simplifies camera operation and programming. The system offers a programmable joystick for intuitive manual control, allowing operators to pan, tilt, and zoom cameras seamlessly. The joystick’s responsive design provides precise control, essential for tracking fast-moving subjects or focusing on specific areas of interest.

The MCC2400 also supports high-definition video streaming and advanced video analytics, enhancing its surveillance capabilities. The system is compatible with various camera models, including PTZ (pan-tilt-zoom) cameras, ensuring scalability and adaptability to different surveillance needs. Video feeds can be transmitted in real-time, allowing operators to monitor live footage and respond to incidents as they occur.

In terms of connectivity, the MCC2400 is equipped with both RS-422 and RS-485 communication protocols. This versatility enables integration with a wide range of camera systems and other surveillance equipment, facilitating a comprehensive security solution. Additionally, the system supports multi-site operation, enabling security personnel to manage cameras across different locations from a central control point.

Robustness and reliability are vital characteristics of the MCC2400. The system is designed to operate in challenging environments, with features that enhance its durability and performance. It is also equipped with a fail-safe mechanism, ensuring continuous operation even during power interruptions or system failures.

Furthermore, the MCC2400 is built with advanced cybersecurity measures to protect against unauthorized access and data breaches. This focus on security is essential in today's interconnected world, where safeguarding sensitive information is paramount.

In conclusion, the Pelco MCC2400 stands out as a comprehensive camera control solution that combines ease of use with advanced technology. Its high-definition support, robust connectivity options, and strong cybersecurity features make it an essential tool for any professional video surveillance operation.