Pelco Manual C221M-C (6/03) 3
IMPORTANT
Refer to the following chart for recommended mounts, installation surfaces, and minimal
hardware requirements.
Mount Recommended Mounting Surface Recommended Hardware
MRCA Solid Concrete* Four 5/16 x 2 3/4-inch strike anchors
Ceiling Wall board/2 x 4’s Two 5/16 x 2-inch lag bolts (bolts must
Mount be attached to stud)
Plywood (3/4-inch construction grade) Four 5/16 x 2-inch lag bolts
MRWA Solid Concrete* Three 5/16 x 2 3/4-inch strike anchors
Wall Hollow cinder block Three 5/16 x 2 1/2-inch T-anchors
Mount Wall board/2 x 4’s Three 5/16 x 2-inch lag bolts (bolts must
be attached to stud)
Plywood (3/4-inch construction grade) Four 5/16 x 2-inch lag bolts
*Recommended strength of concrete is 3600 psi or 25 Mpa.
DESCRIPTIONPelco’s MR5000 public viewing system is specifically designed for retail applications to
provide a clear, visual warning to potential shoplifters that these premises are under
surveillance. When properly installed the system is an effective deterrent against shoplifting.
Use the MR5000L to mount Pelco’s PMCS19A and PMC21A monitors and other view
station accessories (PCM5000 and ICS-DO101ABK) to a ceiling. The MR5000L can
support loads up to 66 pounds (29.94 kg).