Pelco MR5000L operation manual Connect Video and Power to Monitor, Final Adjustments

CAUTION:

Secure the monitor to the rack before

adjusting the angle of the rack.

￿Connect Video and Power to Monitor

a.Connect the video cable to the BNC video input on the rear panel of the monitor.

b.Plug the power cable into the AC INLET connection on the rear panel of the monitor. Refer to the manual supplied with the monitor for operating instructions.

￿Final Adjustments

a.Monitor Rack - Refer to Figure 7 and adjust the monitor angle. The rack is adjustable in 5-degree increments up to a 15-degree angle.

b.Mount Arm - Turn mount arm to desired position. Tighten the bottom set screw on the swivel collar to secure in place.

			WARRANTY AND RETURN INFORMATION
	WARRANTY
	Pelco will repair or replace, without charge, any merchandise proved defective in			If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100
	material or workmanship for a period of one year after the date of shipment. Ex-			or (559) 292-1981 to obtain a Repair Authorization number (RA), and provide the
	ceptions to this warranty are as noted below:			following information:
	• Five years on Pelco manufactured cameras (CC3500/CC3600/CC3700 and			1. Model and serial number
	MC3500/MC3600 Series); two years on all other cameras.			2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number
	• Three years on Genex® Series (multiplexers, server, and keyboard) and			3. Details of the defect or problem
	090 Series Camclosure® Camera System.
	• Two years on 100/150, 200, and 300 Series Camclosure Camera Systems.			If there is a dispute regarding the warranty of a product which does not fall under
	• Two years on all standard motorized or fixed focal length lenses.			the warranty conditions stated above, please include a written explanation with
	• Two years on Legacy®, CM6700/CM6800/CM6800E/CM8500/CM9500/			the product when returned.
	CM9740/CM9760 Matrix, DF5 and DF8 Series Fixed Dome products.
	• Two years on Spectra®, Esprit®, and PS20 Scanners, including when used in			Method of return shipment shall be the same or equal to the method by which the
	continuous motion applications.			item was received by Pelco.
	• Two years on Esprit and WW5700 series window wiper (excluding wiper blades).			RETURNS
	• Eighteen months on DX Series digital video recorders.
	• One year (except video heads) on video cassette recorders (VCRs). Video heads			In order to expedite parts returned to the factory for repair or credit, please call
	will be covered for a period of six months.			the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization num-
	• Six months on all pan and tilts, scanners or preset lenses used in continuous			ber (CA number if returned for credit, and RA number if returned for repair).
	motion applications (that is, preset scan, tour and auto scan modes).
				All merchandise returned for credit may be subject to a 20% restocking and
	Pelco will warrant all replacement parts and repairs for 90 days from the date of			refurbishing charge.
	Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid
	to Pelco, Clovis, California. Repairs made necessary by reason of misuse,			Goods returned for repair or credit should be clearly identified with the assigned
	alteration, normal wear, or accident are not covered under this warranty.			CA or RA number and freight should be prepaid. Ship to the appropriate address
				below.
	Pelco assumes no risk and shall be subject to no liability for damages or loss
	resulting from the specific use or application made of the Products. Pelco’s liability			If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico:
	for any claim, whether based on breach of contract, negligence, infringement of			Service Department
	any rights of any party or product liability, relating to the Products shall not exceed			Pelco
	the price paid by the Dealer to Pelco for such Products. In no event will Pelco be			3500 Pelco Way
	liable for any special, incidental or consequential damages (including loss of use,			Clovis, CA 93612-5699
	loss of profit and claims of third parties) however caused, whether by the negligence
	of Pelco or otherwise.			If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico:
				Intermediate Consignee	Ultimate Consignee
	The above warranty provides the Dealer with specific legal rights. The Dealer may			American Overseas Air Freight	Pelco
	also have additional rights, which are subject to variation from state to state.			320 Beach Road	3500 Pelco Way
				Burlingame, CA 94010	Clovis, CA 93612-5699
				USA	USA
REVISION HISTORY
Manual #		Date	Comments
C221M		9/01	Original version.
C221M-A		9/02	Revised Important Safeguards and Warnings and added an installation warning.
C221M-B		2/03	Supplied hardware revised.
C221M-C		6/03	Added ETL Listing and revised Safeguards and Warnings.
® Pelco, the Pelco logo, Spectra, Genex, Esprit, Camclosure, and Legacy are registered trademarks of Pelco.					© Copyright 2003, Pelco.
					All rights reserved.

8 Pelco Manual C221M-C (6/03)