STEP 1B
CONNECTING THE RECEIVER – NET101R/R-A
NOTE: Skip this step if a receiver will not be used.
1.Plug in the supplied power adapter to
2.Attach the monitor to the BNC connector VIDEO OUT on the receiver.
3.Connect a network cable from the port labeled ETHERNET/UTP on the
4.Connect the port labeled TRANSPARENT DATA to the correctly wired PV130 adapter, and connect keyboards (for example, KBD4000,
PELCONET FRONT PANEL
1 | 2 |
|
PELCONET BACK PANEL
12 VAC
KBD300
| 12 VDC RD(A) |
3 | RD(B) |
| |
| PV130 |
4 | 5 | DIRECT | |
MODE | |||
3 | 6 | ||
|
2 | 7 | 4 |
1 | 8 |
|
STRAIGHT CABLE
4800, 8, NONE, 1 | 00684 |
5 |