Pelco PMCL219A manual Installation, Desk Stand, Wall Mounting

Installation

The monitor can be installed using any of the following options:

•Desktop Stand

•Flat Wall Mounting

•Rack Mounting

DESK STAND

The monitor comes with a desktop foot stand attached, so it can be placed on any flat surface (desk or table). You can manually adjust the monitor to the viewing angle you want by repositioning the foot stand on the back of the monitor.

To detach the stand, remove the four mounting screws from the back of the monitor.

WALL MOUNTING

The monitor can be mounted to a wall using one of the following optional mounts: PMCL-WM, PMCL-WMT, PMCL-WM1A, and PMCL-WM2A wall mount kits.

•The PMCL-WM mount has a maximum load capacity of 68 lb (30.8 kg).

•The PMCL-WMT, PMCL-WM1A, and PMCL-WM2A mounts have a maximum load capacity of 90 lb (40.8 kg).

WARNING: Pelco strongly recommends that a professional installer performs the bracket and LCD monitor installation to ensure the proper installation and attachment.

VESA 100

SCREW M4 X 0.7 X 12 MM

WALL MOUNT (EXCLUDED)

Figure 2. Wall Mount

To mount the monitor to a wall (refer to Figure 2):

1.Align the screw holes in the wall mount with the mounting holes in the back of the monitor.

2.Insert and tighten four M4 x 0.7 x 12 mm screws (not supplied).

3.Refer to the applicable mount manual for instructions on how to attach the mount to the wall.

8 C2925M-C (9/09)